Xyratex 56193 SATA Hard Drive Tray/Caddy

Xyratex (Original) 56193 SATA tray / caddy for mounting 3.5" SATA drives in Xyratex RS servers. An interposer is also required to adapt the drive to a SAS backplane. Compatible with Xyratex RS-1220-E3-XPN Storage Arrays.

New Pull Xyratex Original with screws.

Xyratex (Original) 56193 tray / caddy for mounting 3.5" SATA drives in Xyratex servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Xyratex RS-1220-E3-XPN Storage Arrays.

New Pull Xyratex Original with screws

NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A 4-69241-02 interposer board is also required

Alternate Part Numbers: 56193-05 / 56193-06 / 56193-07

Compatibility

Compatible with Xyratex RS-1220-E3-XPN Storage Arrays.

New Pull Xyratex Original with screws

This tray will accept any 3.5" x 1.0" SATA hard drive that has standard SATA 1.5Gbps or 3.0Gbps interface.

We also have SATA hard drives to fit in this tray: