|
|
Seagate ST336704FCV Fibre / Fiber Channel Hard Drive
Item Number: SGT-ST336704FCV-RF-OE
Manufacturer's Part Number: ST336704FCV |
  |
| |
Seagate Cheetah ST336704FCV 36LP 36GB 10K 2Gbps 40pin Fibre / Fiber Channel Hard Drive - Refurbished
|
| |
 |
 |
Capacity: 36GB
Spindle Speed: 10,000RPM
Interface Type: Fibre Channel - Internal - Arbitrated Loop, ASA II
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Sustained Throughput (MBps): 35.5
Average Seek Time (read/write ms): 5.2/6
Electrical Interface Speed: FC-AL - 2Gbps
On-Board Cache: 4MB |
| |
 |
 |
These drives will fit in all of our hard drive trays: |
| |
| |
| |
|
|
|
|
| |
 |
 |
|
Cheetah 36LP FCV drives have the following standard features:
• Integrated dual port FC-AL controller
• Concurrent dual port transfers
• Support for FC arbitrated loop, private and public attachment
• Differential copper FC drivers and receivers
• Downloadable firmware using the FC-AL interface
• Supports SCSI enclosure services via interface connector
• 128-deep task set (queue)
• Supports up to 32 initiators
• Drive selection ID and configuration options are set on the FC-AL backpanel or through interface commands.
Jumpers are not used on the drive.
• Fibre Channel worldwide name uniquely identifies the drive and each port
• User-selectable logical block size (512 to 704 bytes per logical block)
• Selectable frame sizes from 128 to 2,112 bytes
• Industry standard 3.5-inch low profile form factor dimensions
• Programmable logical block reallocation scheme
• Flawed logical block reallocation at format time
• Programmable auto write and read reallocation
• Reed-Solomon error correction code
• Sealed head and disc assembly (HDA)
• No preventive maintenance or adjustments required
• Dedicated head landing zone
• Automatic shipping lock
• Embedded Grey Code track address to eliminate seek errors
• Self-diagnostics performed at power on
• 1:1 interleave
• Zone bit recording (ZBR)
• Vertical, horizontal, or top down mounting
• Dynamic spindle brake
• 4,096 Kbyte data buffer (16,384 Kbytes on FCV drives). See Section 4.5.
• Embedded servo design
• Reallocation of defects on command (Post Format)
• Fibre Channel interface transports SCSI protocol
Compatibility
|
| |
 |
 |
|
| Technical Specifications |
| Description |
| Model number |
ST336704FCV |
| Model Name |
Cheetah 36LP |
| Form Factor(width) |
3.5" |
| Form Factor(height) |
low-profile |
| Physical Specifications |
| Height |
25.4 mm |
| Width |
101.6 mm |
| Length |
146 mm |
| Weight |
0.6 kg |
| Capacity/Interface |
| Formatted Capacity |
36.7 Gbytes, formatted |
| Interface Type |
40-pin SCA |
| Performance |
| Transfer Rates |
|
| Internal Transfer Rate (min) |
28 Mbits/sec |
| Internal Transfer Rate (max) |
427 Mbits/sec |
| Formatted Int Transfer Rate (min) |
26.700000 Mbits/sec |
| Formatted Int Transfer Rate (max) |
40.200000 Mbits/sec |
| External (I/O) Transfer Rate (max) |
200 MBytes/sec |
| Avg Formatted Transfer Rate |
35.5 MBytes/sec |
| Seek Times |
|
| Average Seek Time, Read |
5.2 msec typical |
| Average Seek Time, Write |
6 msec typical |
| Track-to-Track Seek, Read |
0.6 msec typical |
| Track-to-Track Seek, Write |
0.9 msec typical |
| Average Latency |
2.99 msec |
| Other |
|
| Default Buffer (cache) Size |
4,096 Kbytes |
| Spindle Speed |
10,000 RPM |
| Configuration |
| Number of Discs (physical) |
6 |
| Number of Heads (physical) |
12 |
| Total Cylinders |
14,100 |
| Bytes Per Sector |
512 |
| Recording Components |
|
| Recording Method |
NPV |
| Electrical Requirements |
| Current |
|
| Power |
|
| Idle Power (typ) |
12.5 watts |
| Environmental Specifications |
| Shock and Vibration |
|
| Max Operating Shock (11-msec) |
10 Gs |
| Max Nonoperating Shock (2-msec) |
200 Gs |
| Operating Vibration (max) |
0.5 Gs |
| Nonoperating Vibration (max) |
2 Gs |
| Temperature and Humidity |
|
| Operating Temperature (max) |
55 deg C |
| Operating Temperature (min) |
5 deg C |
| Nonoperating Temperature (max) |
70 deg C |
| Nonoperating Temperature (min) |
-40 deg C |
| Altitude |
|
| Acoustics |
|
| Acoustics, Idle (sound power, typ) |
3.9 Bels |
| Reliability |
| MTBF (Hours) |
1,200,000 hours |
| Recoverable Read Errors |
10 per 1012 bits read |
| Nonrecoverable Read Errors |
1 per 1015 bits read |
| Seek Errors |
1 per 108 bits read |
| Supports S.M.A.R.T. |
Yes |
| Service Life |
5 year(s) |
| Limited Warranty Period |
5 year(s) |
Click here to view the manufacturers item description/brochure |
| |
|
|
|
|