Seagate Cheetah 15K.6 300GB 15K 4Gbps 40pin FC-AL Fibre / Fiber Channel Hard Drive ST3300656FC - New Pull
Capacity: 300GB Spindle Speed: 15,000RPM Interface Type: Fibre Channel - Internal - Arbitrated Loop, ASA II Disk Size: 3.5"x1.0" (Low Profile Hard Drive) Sustained Throughput (MBps): 164 Average Seek Time (read/write ms): 3.4 / 3.9 Electrical Interface Speed: FC-AL - 4Gbps On-Board Cache: 16MB
Dell Powervault 224F Fibre Channel Storage Array / SAN Slave Unit - 14 Bays - Used
Dell F238F / X968D SAS / SATA Hard Drive Tray/Caddy - Brand New for SAS / Serial SCSI and SATA Hard Drives for Dell Poweredge T310, R410, T410, R510, R610, T610, R710, T710 with new style angular facia - Brand New Dell Original with screws.
Dell Powervault 660F Fibre Channel Storage Array / SAN Head Unit - 14 Bays - Used
Dell F238F / X968D SAS / SATA Hard Drive Tray/Caddy - Used Pull
For SAS / Serial SCSI and SATA Hard Drives for Dell Poweredge T310, R410, T410, R510, R610, T610, R710, T710 with new style angular facia - Used Pull Dell Original with screws.
Qlogic Gigabit Single Port Optical PCI Fiber Fibre Channel Host Bus Adapter QLA2200F/66 - New Pull
Dell F9541 / NF467 / H9122 / G9146 / MF666 / D981C / 0D981C / Y973C / 0Y973C / J105C / G302D / 0G302D tray / caddy - Brand New for SAS / Serial SCSI / SATA Hard Drives for Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.
Brand New Dell Original with screws
NOTE: for SATA drives with interposers (optional not required) the CC852 tray is required instead. SATA drives in the MD1000 require interposers and the CC852 tray
Compatibility
This drive is compatible with any of our Fibre / Fiber Channel adapters and also with any of our Fibre / Fiber hot-swap trays.