|
|
Seagate ST3300655SS SAS Hard Drive
Item Number: SGT-ST3300655SS-BN-OE-DEL
Manufacturer's Part Number: ST3300655SS |
  |
| |
Seagate Cheetah ST3300655SS 15K.5 300GB 15K 3.0Gbps Serial SCSI / SAS Hard Drive - Brand New OEM
|
| |
 |
 |
Capacity: 300GB
Spindle Speed: 15,000RPM
Interface Type: SAS / Serial Attached SCSI
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Sustained Throughput (MBps):
Average Seek Time (read/write ms):
Electrical Interface Speed: SAS / Serial Attached SCSI - 3.0Gbps
On-Board Cache: 16MB |
| |
|
|
These drives will work in any of our SAS drive trays: |
|
| |
|
|
Seagate Cheetah ST3300655SS 15K.5 300GB 15K 3.0Gbps Serial SCSI / SAS Hard Drive - Brand New OEM
Dell PN: GM251
| Features |
Benefits |
15K RPM spindle speed
|
Delivers more I/O's per second and faster sustained transfer rates than 10K 3.5-inch drvies, enabling the same high performance to be met with fewer drives.
|
Background Media Scan (BMS)
|
Second generation Seagate-exclusive BMS proactively scans the media for potential defects during drive idle time. It enables incipient errors to be corrected before data is lost.
|
Perpendicular Recording
|
Perpendicular recording is fundamentally superior, enabling the highest areal density with 30 percent higher performance.
|
Nonrecoverable Error Rate
|
The nonrecoverable error rate has been improved by a factor of 10.
|
Idle Read After Write (IRAW)
|
Seagate-exclusive IRAW enhances data protection by verifying-during drive idle time-that data in the drive buffer was properly written.
|
- The industry's highest reliability 3.5" drive
- 30% more IOPS and 20% faster response times than 3.5" 10K drives
|
Compatibility
All SAS compatible servers including:
Dell PowerEdge 1900, 1950, 2900, 2950, 6900, 6950. PowerVault MD1000
|
| |
|
|
| Specifications |
300 GB |
| Model Number |
ST3300655SS |
| Interface |
SAS 3Gb/s |
| Cache |
16 MBytes |
| Capacity |
300 GB |
| Areal density (avg) |
110000 Gbits/inch2 |
| Guaranteed Sectors |
286749488 |
| Number of pins on the I/O connector |
5 |
| PHYSICAL |
|
| Height (max) |
26.11 mm (1.028 inches) |
| Width (max) |
101.85 mm (4.010 inches) |
| Length (max) |
146.99 mm (5.787 inches) |
| Weight (typical) |
839 grams (1.85 pounds) |
| PERFORMANCE |
|
| Spindle Speed |
15000 rpm |
| Average latency |
2.0 msec |
| Random read seek time |
3.50 msec |
| Random write seek time |
4.0 msec |
| RELIABILITY |
|
| MTBF |
1400000 hours |
| Annual Failure Rate |
0.62 |
| Power-on hours |
8760 hours |
| Unrecoverable read errors |
1 in 10^16 |
| Recoverable read errors |
10 in 10^12 |
| ENVIRONMENT |
|
| Ambient Temperature |
|
| Operating |
5 to 55 degrees C |
| Nonoperating |
-40 to 70 degrees C |
| Maximum operating temperature change |
20 degrees C per hour |
| Maximum nonoperating temperature change |
20 degrees C per hour |
| Minimum operating case temperature |
5 degrees C |
| Maximum operating case temperature |
50 degrees C |
| Relative Humidity |
|
| Operating |
5 to 95 % |
| Nonoperating |
5 to 95 % |
| Maximum allowable humidity change |
20 % per hour |
| Altitude |
|
| Operating altitude (min) |
-305 meters (-1000 feet) |
| Operating altitude (max) |
3048 meters (10000 feet) |
| Nonoperating altitude (min) |
-305 meters (-1000 feet) |
| Nonoperating altitude (max) |
12210 meters (40000 feet) |
| Shock |
|
| Operating Shock (max) |
60 Gs at 2 msec |
| Nonoperating Shock (max) |
250 Gs at 2 msec |
| Vibration |
|
| Operating vibration |
0.5 Gs at 10 to 500 Hz |
| Nonoperating vibration |
2.0 Gs at 22 to 500 Hz Hz |
Click here to view the manufacturers item description/brochure |
| |
|
|
|
|
 "ST3300655SS SAS Hard Drives Photo"){kind=small}
 "ST3300655SS SAS Hard Drives Photo"){kind=small}
 "ST3300655SS SAS Hard Drives Photo"){kind=small}
 "ST3300655SS SAS Hard Drives Photo"){kind=small}
