Seagate NL35 Series ST3400071FCV Fibre / Fiber Channel Hard Drive

Seagate NL35 Series 400GB 7.2K 4Gbps Fibre Channel Hard Drive ST3400071FCV - New Pull

Capacity: 400GB
Spindle Speed: 7,200RPM
Interface Type: Fibre Channel - Internal - Arbitrated Loop, ASA II
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Sustained Throughput (MBps):
Average Seek Time (read/write ms): 8.5/9.5
Electrical Interface Speed: FC-AL - 4Gbps
On-Board Cache: 8MB

NL35 Series drives combine Tunneling Magnetoresistive (TMR) heads and a Fibre Channel interface to provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputers.

NL35 Series drives support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and the Fibre Channel Interface Manual (part number 77767496) which describes the general interface characteristics of this drive. NL35 Series drives are classified as intelligent peripherals and provide level 2 conformance (highest level) with the ANSI SCSI standard.

NL35 Series drives use a dedicated landing zone at the innermost radius of the media to eliminate the possibility of destroying or degrading data by landing in the data zone. The drive automatically goes to the landing zone when power is removed.

Alternate Part Number: 9Y8107-030

Compatibility

This drive is compatible with any of our Fibre / Fiber Channel adapters and also with any of our Fibre / Fiber hot-swap trays.