|
|
Seagate Barracuda ATA IV ST340016A IDE / ATA/100 Hard Drive
Item Number: SGT-ST340016A-RF-OE
Manufacturer's Part Number: ST340016A |
  |
| |
Seagate Barracuda ATA IV ST340016A 40GB IDE ATA/100 IDE Hard Drive - Refurbished
|
| |
 |
 |
Capacity: 40GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5")
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Sustained Throughput (MBps):
Average Seek Time (read/write ms): 9.5 / 10.5
Electrical Interface Speed: EIDE / Ultra ATA/100 - 100MBps
On-Board Cache: 2MB |
| |
 |
 |
|
| |
| |
| |
|
|
|
|
| |
 |
 |
These drives provide the following key features:
- 7,200-RPM spindle speed and 2-Mbyte buffer combine for superior desktop performance
- High instantaneous (burst) data-transfer rates (up to 100 Mbytes persecond) using Ultra DMA mode 5
- Giant magnetoresistive (GMR) recording heads and EPRML technology, which provide the drives with increased areal density
- State-of-the-art cache and on-the-fly error-correction algorithms
- Full-track multiple-sector transfer capability without local processor intervention
- Quiet operation
- 350 Gs nonoperating shock
- The innovative, shock-absorbing SeaShield® cover protects the drive against electrostatic discharge (ESD) and other handling damage. It also includes installation instructions and jumper settings.
- SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
- The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the industry’s most comprehensive protection for disc drives.
- Support for S.M.A.R.T. drive monitoring and reporting
- Support for Read Multiple and Write Multiple commands
- Support for autodetection of master/slave drives that use cable select (CSEL)
Compatibility
This drive is compatible with any computer having an IDE/PATA controller. |
| |
 |
 |
SEAGATE TECHNOLOGY LLC
1-800-SEAGATE
http://www.seagate.com
(C)opyright 2001
ST-340016A (Barracuda ATA IV 40016, Ultra ATA/100)
�����������ͻ
� REAR VIEW �
�����������ͼ
J2 40 pin I/O Cable Connection
� pin-20 removed
�
� ��� [spare jumper on pins 5-7]
� �
���������� ������������ͳ����1�/���������\ TOP (HDA)
͵::::::::::�::::::::1� :�: : : � 0 0 0 0 ���
����������������������8�ͳͳͳ���5�G�G�12� BOTTOM
� � � �
� � � ��� Limit Capacity (see below)
� � ����� Reserved
O=OFF, X=ON -->> X-O������ Master ON
O-O������ Slave OFF
X-X������ Slave Present (when pins 7-8 ON
used on Master drive)
O-X������ Cable Select (when pins 7-8 OFF)
On drives greater than 33.8GB, Limit Capacity jumper changes total
available sectors as reported via Identify Drive data words 60-61 to
33.8GB to solve issues with certain BIOS during power on. The ATA
Set Features F1 sub-command will cause Identify Data words 60-61 to
report the true full capacity. Third party partitioning software may
be needed to achieve full capacity when using this option jumper.
ST-340016A
Barracuda ATA IV
FORMATTED CAPACITY (GB) __________________40.0
ACTUATOR TYPE ____________________________VOICE COIL
CYLINDERS __PHYSICAL______________________
HEADS ______PHYSICAL______________________2
DISCS (3.5 in) ___________________________1
MEDIA TYPE _______________________________THIN FILM
HEAD TYPE ________________________________GMR
RECORDING METHOD _________________________EPRML 16/17 ZBR
INTERNAL TRANSFER RATE (Mbits/sec) _______up to 555
EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 100
PIO/DMA/UDMA MODE (max) __________________4/2/5
DMA SUPPORT ______________________________EISA Type B
SPINDLE SPEED (RPM) ______________________7200
AVERAGE LATENCY (mSEC) ___________________4.16
BUFFER ___________________________________2MB
Read/Write Multiple, Read Look-Ahead,
Multi-Segmented
INTERFACE ________________________________Ultra ATA/100
SECTORS PER DRIVE (LBA mode) _____________78,165,360
TPI (TRACKS PER INCH) ____________________58,000
BPI (KBITS PER INCH) _____________________up to 540,000
AVERAGE ACCESS (ms seek/read/write) ______9.5/9.5/10.5
SINGLE TRACK SEEK (ms seek/read/write) ___/1.0/1.2
MAX FULL SEEK (ms seek/read/write) _______//
MTBF (power-on hours) Office _____________600,000
SHOCK (G's, 11ms/2ms):
operating (Read/Write) __________/63
abnormal ________________________
nonoperating ____________________/350
ACOUSTICS (bels)
fluid bearing (typ/max) _________2.1/3.4
POWER DISSIPATION (watts) ________________
POWER REQUIREMENTS: +12V START-UP (amps) _2.8
POWER MANAGEMENT (Watts):
ACTIVE _______________13.0
IDLE _________________9.8
STANDBY (typ/max) ____1.15/1.3
Physical:
Height (inches/mm): 1.028/26.1
Width (inches/mm): 4.02/101.8
Depth (inches/mm): 5.75/147.0
Weight (lb/g): 1.2/544
Click here to view the manufacturers item description/brochure |
| |
|
|
|
|