Samsung Spinpoint S166 HD161HJ 160GB 7.2K SATA-300 Hard Disk Drive

Samsung SpinPoint S166 HD161HJ 160GB 7.2K  SATA-300 3.5" Hard Drive - New Pull OEM

Capacity: 160GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Sustained Throughput (MBps): 61
Average Seek Time (read/write ms):
Electrical Interface Speed: SATA 300 - 3.0Gbps
On-Board Cache: 16MB

These drives will fit in our hard drive trays:

- Up to 160Gb formatted capacity
- Serial ATA 3.0 Gpbs interface support
- SATA native command queuing feature
- device intitiated STAT power management
- staggered spin-up support
- high speed dual DSP based architecture
- ATA S.M.A.R.T. compliant
- ATA automatic acoustic managment feature
- ATA 48-bit address feature
- ATA streaming feature (optional)
- ATA device configuration overlay feature
- ImpacGuard™
- SilentSeek™

DPN: 0XP895 / XP895

Compatibility

This drive is compatible with any of our SATA hot swap trays and controllers.

Drive Configurations

• Capacity  
  • 160 GB 
• Interface 
  • SATA 3.0Gbps 
• Buffer DRAM Size 
  • 8 MB 
• Byte per Sector 
  • 512 bytes 
• Rotational Speed 
  • 7,200 RPM 

Performance Specifications

• Average Seek time(typical) 
  • 8.9 ms 
• Data Transfer Rate / Media to/from Buffer (Max.) 
  • 175 MB/sec 
• Data Transfer Rate / Buffer to/from Host (Max.) 
  • 300 MB/sec 
• Average Latency 
  • 4.17 ms 
• Drive Ready Time(typical) 
  • 8 sec 

Reliability Specifications

• Non-recoverable Read Error 
  • 1 sector in 10^15 bits 

Acoustics

• Idle 
  • 2.45 Bel 
• Performance Seek 
  • 2.80 Bel 

Environmental Specifications

• Temperature / Operating 
  • 0 ~ 60 °C 
• Temperature / Non-operating 
  • -40 ~ 70 °C 
• Humidity (non-condensing) / Operating 
  • 5 ~ 90 % 
• Humidity (non-condensing) / Non-operating 
  • 5 ~ 95 % 
• Liner Shock (1/2 sine pulse) / Operating 
  • 70 G 
• Liner Shock (1/2 sine pulse) / Non-operating 
  • 350 G 
• Altitude (relative to sea level) / Operating 
  • -300 to 3,000 m 
• Altitude (relative to sea level) / Non-operating 
  • -300 to 12,000 m 

Power Requirements

• Voltage 
  • +5V±5%, +12V±10% 
• Spin-up Current (Max.) 
  • 2.0 A 
• Seek (typical) 
  • 5.7W 
• Read/Write (typical) 
  • 6.1W 
• Idle (typical) 
  • 4.4W 
• Standby (typical) 
  • 0.7/1W 
• Sleep (typical) 
  • 0.7/1W 

Physical Dimension

• Height (Max.) 
  • 26.1 mm 
• Width 
  • 101.5 mm 
• Length 
  • 147.0 mm 
• Weight (avg.) 
  • 470 g