|
|
Hitachi Deskstar 0A38730 1000GB / 1TB SATA Hard Drives
Item Number: HIT-0A38730-RF-OE
Manufacturer's Part Number: 0A38730 |
  |
| |
Hitachi Deskstar E7K1000 1000GB / 1TB 7.2K Enterprise SATA Hard Drive 0A38730 / HDE721010SLA330 - Refurbished
|
| |
 |
 |
Capacity: 1000GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Sustained Throughput (MBps): 42 - 85
Average Seek Time (read/write ms): 8.2
Electrical Interface Speed: SATA 300 - 3.0Gbps
On-Board Cache: 32MB |
| |
 |
 |
|
| |
| |
|
|
|
|
| |
 |
 |
The Hitachi Global Storage Technologies Integration Lab tested these families of Deskstar™ drives for compatibility with a wide variety of systems and operating systems. Testing was performed to demonstrate compatibility with the following hardware and software. Other combinations of hardware and software are expected to function with this product family, but have not been evaluated. Hitachi recommends you back up all data before installing your new hard drive. Alternate P/N's: HDE721010SLA330 Capacity: 1000GB / 1TB / 1 TB
Compatibility
This hard drive is compatible with any of our SATA hot swap drive trays. |
| |
 |
 |
| Drive specification | 0A38730 / HDE721010SLA330 | | Formatted Gbytes (512 bytes/sector) | 1000 | | Max. areal density | 244 (Gbits/sq. in.) | | Data Buffer | 32 MB | | Rotational Speed | 7200rpm | | Media Transfer Rate (Mb/sec, max) | 1406 | | Interface transfer rate (MB/s, max) | 300 | | Seek time (read, typical, ms) | 8.5 | | I/O data transfer rate (Mbytes/sec max) | 300 | | Height (max) | 26.11 mm (1.028 inches) | | Width (max) | 101.85 mm (4.010 inches) | | Length (max) | 146.99 mm (5.787 inches) | | Weight (max) grams | 700 | | Startup current (typical) 12V (peak) | 2.0 amps | | Idle mode (typical) watts | 9.0 | | Ambient temperature | 5° to 60°C (op.) –40° to 70°C (nonop.) |
Click here to view the manufacturers item description/brochure |
| |
|
|
|
|