Fujitsu MAU Fibre Channel Hard Drive MAU3147FC

Dell F238F / X968D SAS / SATA Hard Drive Tray/Caddy - Brand New for SAS / Serial SCSI and SATA Hard Drives for Dell Poweredge T310, R410, T410, R510, R610, T610, R710, T710 with new style angular facia - Brand New Dell Original with screws.

Dell F9541 / NF467 / H9122 / G9146 / MF666 / D981C / 0D981C / Y973C / 0Y973C / J105C / G302D / 0G302D tray / caddy - Used Pull for SAS / Serial SCSI / SATA Hard Drives for Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Used Pull Dell Original with screws

NOTE: for SATA drives with interposers (optional not required) the CC852 tray is required instead. SATA drives in the MD1000 require interposers and the CC852 tray

Dell F238F / X968D SAS / SATA Hard Drive Tray/Caddy - Used Pull

For SAS / Serial SCSI and SATA Hard Drives for Dell Poweredge T310, R410, T410, R510, R610, T610, R710, T710 with new style angular facia - Used Pull Dell Original with screws.

Dell (Original) CC852 / D962C Universal SATA tray / caddy for mounting SATAu / SATA u drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Brand New Dell Original with screws

NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required

NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray

Dell F9541 / NF467 / H9122 / G9146 / MF666 / D981C / 0D981C / Y973C / 0Y973C / J105C / G302D / 0G302D tray / caddy - Brand New for SAS / Serial SCSI / SATA Hard Drives for Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Brand New Dell Original with screws

NOTE: for SATA drives with interposers (optional not required) the CC852 tray is required instead. SATA drives in the MD1000 require interposers and the CC852 tray

Dell (Original) CC852 / D962C tray / caddy for mounting SATAu / SATA u drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Used Pull Dell Original with screws

NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required

NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray