Dell Powervault 220S SCSI Storage Array
Item Number: DEL-PV220S-UP-OE
Manufacturer's Part Number: 220S |
  |
| |
Dell Powervault 220S SCSI Storage Array - 14 Bays, Dual Fans, Dual Power Supplies, Dual Controller Cards - Used |
| |
$595.00
Quantity available for shipping today: 6 Need more? |
 |
| |
 |
 |
Dell PowerVault 220S systems are reliable, flexible, external SCSI expansion enclosures designed to support multiple Dell storage environments and RAID configurations. Each system offers maximized drive-spindle count, hot-plug hard drives, optional redundant power, redundant cooling, rackmount capability, systems management features, and a modular design for easy upgrades. Most major components, including hard drives and power supply/cooling modules are hot-pluggable and can be removed and replaced easily. The enclosure management module (EMM), split-bus module, and SCSI terminator card are "warm-pluggable." This means they can be removed or inserted while the power is on, but all I/O activity has ceased.
Uses Dell 9D988 trays / caddies.
|
| |
|
|
|
Drives
|
SCSI hard drives
|
support for up to fourteen 1-inch-by-3.5-inch LVD Ultra 160 and Ultra 320 hot-plug hard drives, at speeds of 10K or 15K rpm.
|
|
Bus
|
Configurations
|
support for any of the following:
- one 14-device SCSI bus (joined-bus mode)
- one clustered 13-device SCSI bus (cluster mode)
- two independent 7-device SCSI buses (split-bus mode)
|
|
Back-Panel Connectors
|
SCSI connector
|
68-pin shielded P-type SCSI for connection to host
|
|
Backplane Board Connectors
|
Hard drives
|
fourteen 80-pin SCA-2 connectors
|
Power supply/cooling module
|
2 high-current connectors
|
Enclosure management modules (EMM)
|
210-pin connector
|
Split-bus module
|
180-pin connector
|
|
Enclosure Modules
|
EMM
|
2 warm-pluggable modules
|
Split-bus module
|
1 warm-pluggable module with an external slide switch to change between split-bus, joined-bus, and cluster modes
|
SCSI terminator card
|
1 warm-pluggable module to the terminate SCSI bus in nonredundant EMM configurations
|
|
LED Indicators
|
Front panel
|
5 LED status indicators for power, fault, split bus, cluster mode, and over-temperature
|
Hard-drive carrier
|
1 single-color activity LED and 1 two-color LED status indicator per drive
|
EMM
|
3 LED status indicators for power, fault, and active status
|
Split-bus module
|
1 LED indicator for power
|
Power supply and cooling module
|
3 LED status indicators for power supply status, power supply fault, and AC status and 2 for cooling module fault
|
|
Power Supplies
|
Wattage
|
600 W
|
Heat dissipation
|
200 W
|
Voltage
|
100-240 V rated (actual 85-264 V)
|
Frequency
|
50-60 Hz
|
Amperage
|
9.4 A at 100 V, 4.6 A at 200 V
|
|
Physical
|
Height
|
13.26 cm (5.22 inches)
|
Width
|
44.58 cm (17.55 inches)
|
Depth
|
50.8 cm (20 inches)
|
Weight
PowerVault 220S
PowerVault 221S
|
32.4 kg (71.5 lb.) maximum redundant configuration with all hard drives installed
42.2 kg (93.0 lb.) maximum redundant configuration with all hard drives installed
|
|
Environmental
|
Temperature:
Operating
Storage
|
10° to 35°C (50° to 95°F)
-40° to 65°C (-40° to 149°F)
|
Relative humidity
Operating
Storage
|
8% to 80% (noncondensing)
8% to 95% (noncondensing)
|
Altitude
Operating
|
-16 to 3048 m (-50 to 10,000 ft)
|
BTU per hour
|
2750
|
|
Available Hard-Drive Power (Per Slot)
|
Supported hard-drive power consumption
|
up to 1.3 A at +12V
up to 1.5 A at +5V
|
Click here to view the manufacturers item description/brochure |
| |
|
|
| |
 |
Specifications subject to change at any time. DiscounTechnology is not responsible for errors or omissions.
Actual products may vary from images displayed. |
| |
|
|
| These items work with the Dell PowerVault 220S.
|
| |
|
|
|
|
|
|
|
| |
|
|
|
 "220S Powervault 220S SCSI Array Photo")
 "220S Powervault 220S SCSI Array Photo")
 "220S Powervault 220S SCSI Array Photo")
 "220S Powervault 220S SCSI Array Photo")
