Dell F9541 / NF467 / H9122 / G9146 / MF666 / D981C / 0D981C SAS / SATA Hard Drive Trays / Caddies

Dell F9541 / NF467 / H9122 / G9146 / MF666 / D981C / 0D981C / Y973C / 0Y973C / J105C / WR546 tray / caddy - Used Pull for SAS / Serial SCSI / SATA 3.5" Hard Drives for Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Used Pull Dell Original with screws

NOTE: for SATA drives with interposers (optional not required) the CC852 tray is required instead. SATA drives in the MD1000 require interposers and the CC852 tray

Dell / NF467 / H9122 / G9146 / MF666 / D981C / 0D981C / Y973C / 0Y973C / J105C / WR546 tray / bracket / sled / carrier / assembly /caddy  - Brand New for SAS / Serial SCSI / SATA 3.5" Hard Drives for Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays when using SAS Hard Drives. SATA Hard Drives in the MD1000 SCSI Storage Arrays require the CC852 tray.

Used Pull Dell Original with screws

NOTE: for SATA drives with interposers (optional not required) the CC852 tray is required instead

Compatibility

Used Pull Dell Original tray / bracket / sled / carrier / assembly /caddy with four screws.

This tray will accept any 3.5" x 1.0" SAS / SATA hard drive. Not for usage with SATA interposer.

We also have hot-swap SAS and SATA hard drives to fit in this tray, and Dell trays for other PowerEdge models: