Dell CC852 / D962C SATAu / SATA Hard Drive Tray/Caddy

Dell (Original) CC852 / D962C Universal SATA tray / caddy for mounting SATAu / SATA u drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Brand New Dell Original with screws

NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required

NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray

Dell (Original) CC852 / D962C tray / caddy for mounting SATAu / SATA u drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with Dell PowerEdge 840, 1900, 1950, 1950 III, 2900, 2900 III, 2950, 2950 III, 2970, 6900, 6950, R300, R900, R905, T300, T605 Servers and PowerVault MD1000, MD3000, NF100, NF500, NF600 Storage Arrays.

Brand New Dell Original with screws

Cross References with the D962C / 0D962C.

NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required

NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray

Brand New Dell Original with screws

This tray will accept any 3.5" x 1.0" SATA /SATAu hard drive that has standard SATA 1.5Gbps or 3.0Gbps interface.