APC Symmetra 16KVA SY16K N+1 Power ArrayItem Number: APC-SYMSTRF16KVA-N1-RF-OE
Manufacturer's Part Number: SY16K
APC Symmetra 16KVA N+1 11200 Watt Power Array 208/240V SY16K SYMSTRF16KVA- Refurbished
Power Array comes with brand new lead acid batteries.
Symmetra Features & Benefits
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Configurable for N+1 internal redundancy
Provides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Hot-swappable intelligence modules
Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
Hot-swappable power modules
Ensures clean, uninterrupted power to protected equipment during Power Module replacement.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick upgrades later.
Allows additional run time to be quickly added as needed.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Field-replaceable power distribution panel
Ensures compatibility with equipment that has different plug types.
Ensures compatibility with different input frequencies.
Manageable external batteries
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Provides remote management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure® Manager.
Alpha-Numeric Display which displays system parameters and alarms.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Customize UPS capabilities with management cards.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
User-replaceable intelligence modules
Enables simple upgrades and replacements of the Intelligence Modules.
User-replaceable power modules
Enables simple upgrades and replacements of the Power Modules.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to the loads in the event of an extended power outage
Provides temporary battery power when the utility power is out.
Resettable circuit breakers
Enables a quick recovery from overload events.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
Output Power Capacity
11.2 kW/ 16 kVA
Max Configurable Power
11.2 kW/ 16 kVA
Nominal Output Voltage
Output Voltage Note
Configurable for 120/208 or 120/240 output voltage
Efficiency at Full Load
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
57 - 63 Hz for 60 Hz nominal
up to 5 : 1
|(1) Hard Wire 3-wire (2PH + G)
|(1) Hard Wire 4-wire (2PH + N +G)
Internal Bypass (Automatic and Manual)
Nominal Input Voltage
45 - 65 Hz (auto sensing)
|Hard Wire 3-wire (2PH + G)
Input voltage range for main operations
155 - 276V
Other Input Voltages
Batteries & Runtime
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules: 4
Replacement batteries for each module:
10 per battery module
Model: GP1272 F2 (0.25" terminal tabs)
Typical recharge time
Typical Backup Time
at Half Load
16.8 minutes (5600 Watts)
Typical Backup Time
at Full Load
5.1 minutes (11200 Watts)
Communications & Management
Available SmartSlot™ Interface Quantity
Pre-Installed SmartSlot™ Cards
Multi-function LCD status and control console
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
52.00 inches(1321 mm)
24.00 inches(610 mm)
27.00 inches(686 mm)
921.00 lbs.(418.64 kg)
1051.00 lbs.(477.74 kg)
62.00 inches(1575 mm)
33.00 inches(838 mm)
29.00 inches(737 mm)
32 - 104 °F(0 - 40 °C)
Operating Relative Humidity
0-10000 feet(0-3000 meters)
5 - 113 °F(-15 - 45 °C)
Storage Relative Humidity
0-50000 feet(0-15000 meters)
Audible noise at 1 meter from surface of unit
Online Thermal Dissipation
CSA,FCC Part 15 Class A,UL 1778
2 years repair or replace,optional on-site warranties available,optional extended warranties available